Table of Contents

Dipole Length

A Bit of Theory

In general, the wavelength (\$\lambda\$), frequency (\$f\$), and speed (\$v\$) of a travelling wave are related by the three equivalent relations: \$$ v = \lambda f \qquad \text{or} \qquad f = \frac{v}{\lambda} \qquad \text{or} \qquad \lambda = \frac{v}{f} \$$

In ham radio, we often use the last equation to calculate the length of the legs of a dipole antenna:

\$$v = 300000000 \text{ m/s}\$$

\$$ \lambda = \dfrac{300000000}{f} \$$

\$$ \lambda = \dfrac{300}{f} \$$

\$$ L = \dfrac{75}{f} \text{ (in metres)} \qquad \text{or} \qquad L = \dfrac{246}{f} \text{ in feet}\$$

\$$ L = \dfrac{71}{f} \text{ (in metres)} \qquad \text{or} \qquad L = \dfrac{234}{f} \text{ in feet}\$$

Some Experimentation

The problem is that the velocity factor of 95% depends on many things like the size of the cable, the geometry of the antenna, what's around it, etc. So what we can do instead is use the first formula \$ \quad v = \lambda f \quad \$ to measure what the actual speed is for our setup. Here's how I figured out how to cut my inverted V antenna be resonant at 5.3305 MHz.

\$$ L = \dfrac{75}{f} = \dfrac{75}{5.3305} \approx 14.06 \text{ m} \$$

\$$ v = \lambda f = 14.06 \times 4.98 = 70.0 \$$

\$$ \quad L = \dfrac{70.0}{5.3305} \approx 13.12 \text{ m} \quad \$$

\$$ 14.06 \text{ m} - 13.12 \text{ m} = 0.94 \text{m} \$$

Other Considerations

A point that's not obvious is that while folding the end of the antenna on itself will shorten it, thus raising its resonant frequency, folding a metre is not the same as cutting a metre.

The 60m band has four 3 kHz channels and one 15 kHz band between 5.3305 MHz and 5.4065 MHz. Our club uses the lowest channel of 5.3305 MHz. I chose to cut my antenna there instead of the middle of the band because it'll be very easy to fold the ends a bit if I ever need to use it higher up in the band.