Sun Coast Amateur
Radio Club Society

User Tools

Site Tools

You are here: home » aredn » starting » update_checklist
aredn:starting:update_checklist:home

This is an old revision of the document!

Table of Contents

Updating the Firmware

  1. Update using the Administration page. The device will reboot once or twice.
  2. Upload the new information to the AREDN server using the Basic Setup page. This will update this map
  3. Reinstall any additional packages such as meshchat.
  4. If you still see a message like this at the top of the home page: You can force it to disappear by executing the last command on the Advanced Configuration page:
aredn/starting/update_checklist/home.1682175440.txt.gz · Last modified: by 127.0.0.1