Last year, we discussed how the BCARCC was considering following the Western Washington Amateur Relay Association's proposal to move the 2m repeater spacing from 20 kHz to 12.5 kHz and the 70cm repeater spacing from 25 kHz to 12.5 kHz.¹⁾

The 70cm move is pretty straight forward since 12.5 kHz fits exactly twice in 25 kHz so no-one would have to actually change frequency other than changing to narrowband. The 2m move is more involved however since 12.5 kHz doesn't fit nicely into 20 kHz (it does fit 8 times in 5 slices of 20 kHz however).

The latest proposal doesn't explicitly state how the mapping from the current to the proposed frequency would be, but looking at the list, the following scheme minimizes the frequency shift to a maximum of ±5.0 kHz.

Our repeater, for example, would probably have to move to 147.225 MHz. Once technical question we'd have to figure it is whether a 5 kHz change would require the duplexer to be retuned. This is isn't an obvious yes. 5 kHz represents 0.8% of the 600 kHz spread between the input and the output. It may or may not be significant.