blog:2026-08-29:easyskymesh_firmware_for_meshcore
Differences
This shows you the differences between two versions of the page.
| blog:2026-08-29:easyskymesh_firmware_for_meshcore [2026/08/29 12:42] – created va7ilo | blog:2026-08-29:easyskymesh_firmware_for_meshcore [2026/09/06 12:35] (current) – edit mail room to mail servers va7ilo | ||
|---|---|---|---|
| Line 39: | Line 39: | ||
| One thing I didn't know, is both Meshcore and EasySkyMesh Companion firmware lockout CLI from the Meshcore app, the repeater versions you still can however, this is why I had to flash the femoff variant as I could not do it over cli, I was able to connect to it using terminal mode on my PC however and make changes like on the repeater, however the LNA commands are not in there (something about saving space both firmware merged it) so you just need to flash the firmware with the LNA setting you want. | One thing I didn't know, is both Meshcore and EasySkyMesh Companion firmware lockout CLI from the Meshcore app, the repeater versions you still can however, this is why I had to flash the femoff variant as I could not do it over cli, I was able to connect to it using terminal mode on my PC however and make changes like on the repeater, however the LNA commands are not in there (something about saving space both firmware merged it) so you just need to flash the firmware with the LNA setting you want. | ||
| - | Here is a link about getting into CLI mode for a Companion, Repeaters and Mail Rooms are still able to directly access this from the App. | + | Here is a link about getting into CLI mode for a Companion, Repeaters and Room Servers |
| [[https:// | [[https:// | ||
blog/2026-08-29/easyskymesh_firmware_for_meshcore.txt · Last modified: by va7ilo