User Tools

Site Tools


blog:2026-11-06:fire_dispatch_frequencies

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
blog:2026-11-06:fire_dispatch_frequencies [2026/11/06 15:17] – [Scanning] va7fiblog:2026-11-06:fire_dispatch_frequencies [2026/11/06 15:26] (current) – [Scanning] va7fi
Line 1: Line 1:
 ====== Fire Dispatch Frequencies ====== ====== Fire Dispatch Frequencies ======
-On the Sunshine Coast, when a tree falls on the power lines, the fire department always gets called first to investigate.  During a wind storm, listening to their radio communications gives a lot of information as to the severity of the issue.  Here are some of the frequencies they use:+On the Sunshine Coast, when a tree falls on the power lines, the fire department always gets called first to investigate.  During a wind storm, listening to their radio communications gives a lot of information as to the severity of the issue.  Here are some of the frequencies they use.
  
 ===== Initial Dispatch Call ===== ===== Initial Dispatch Call =====
-The first thing that happens is that Dispatch calls the appropriate Fire Department on a frequency of ''149.290 MHz''.  The way that they direct the call is by using two distinct notes at the beginning of the transmission.  Unfortunately, that's not something our radios can filter for, so we'll hear dispatch calls for the entire Sunshine Coast.+The first thing that happens is that Dispatch calls the appropriate Fire Department on a frequency of **149.290 MHz**.  They seem to be using two distinct notes at the beginning of the transmission to direct the call to the appropriate fire department.
  
-After the notes finish playing, Dispatch will repeat the message twice, which will include the address and a description of the issue.+After the notes finish playing, Dispatch will say their message twice, which will include the address and a description of the issue.
  
  
 ===== Fire Department Response ===== ===== Fire Department Response =====
-After the inital Dispatch call, the fire department will call dispatch back on their own frequency to acknowledge the call and ask for more information if needed.+After the initial dispatch call, the fire department will call dispatch back on their own frequency to acknowledge the call and ask for more information if needed.
  
 Here's the list of frequencies and tones used: Here's the list of frequencies and tones used:
Line 22: Line 22:
 </WRAP> </WRAP>
  
-You'll notice that there are really only three distinct frequencies shared between six areas.  The tones are what's preventing the wrong area hearing the wrong conversations (that and their distance).+You'll notice that there are really only three distinct frequencies shared between six areas.  The tones are what's preventing the wrong area from hearing the wrong conversations (that and their distance).
  
  
 ===== Tac ===== ===== Tac =====
-The tactical simplex frequencies are used between fire department units to coordinate.  For example, when directing traffic or giving each other directions.  Most of them are the same frequencies with different tones.+The tactical simplex frequencies are used by the fire personnel to coordinate their efforts.  Most of them are the same frequencies with different tones.
  
 Here's the list of Tac 2 frequencies: Here's the list of Tac 2 frequencies:
Line 51: Line 51:
  
 ===== Scanning ===== ===== Scanning =====
-On my radio, I scan between three frequencies to following the Roberts Creek Fire Department:+On my radio, I scan between three frequencies to listen to the Roberts Creek Fire Department:
   * 149.290 MHz to hear the dispatch call.   * 149.290 MHz to hear the dispatch call.
   * 154.070 MHz with a tone squelch of 114.8 Hz to hear the fire department's reply.   * 154.070 MHz with a tone squelch of 114.8 Hz to hear the fire department's reply.
blog/2026-11-06/fire_dispatch_frequencies.1794003461.txt.gz · Last modified: by va7fi