Differences

This shows you the differences between two versions of the page.

--- ecomm:non-ham [2026/03/25 09:09] – [FRS] va7fi
+++ ecomm:non-ham [2026/03/25 09:40] (current) – [MeshCore] va7fi
@@ Line 75: / Line 75: @@
 <WRAP center round tip 100%>
-By default (and especially in an <fc #ff0000>emergency situation</fc>), CTCSS/DCS should be <fc #ff0000>turned off</fc> so that your radio can hear everyone.
+By default (and especially in an <fc #ff0000>emergency situation</fc>), CTCSS/DCS should be <fc #ff0000>disabled</fc> so that your radio can hear everyone.
 </WRAP>
 </WRAP>
@@ Line 129: / Line 129: @@
 ==== First Use Setup ====
 Refer to the user manual for specific instructions, but in general, you should:
-  * Disable the CTCSS/DCS on all 22 channels.  On the Revetis RB48, the CTCSS/DCS is represented by a number between ''1'' and ''121'' (on the right).  The number ''0'' means that CTCSS or DCS is disabled.
+  * Disable the //CTCSS/DCS// on all 22 channels.  On the Revetis RB48, the CTCSS/DCS is represented by a number between ''1'' and ''121'' (on the right).  The number ''0'' means that CTCSS or DCS is disabled.
-  * A Roger Beep is a short chirp that's transmitted when you let go of the PTT button to indicate that you're done talking.  It can be pretty annoying for others and you should turn it off.
+  * Disable the //Roger Beep//, which is short chirp that's transmitted when you let go of the PTT button to indicate that you're done talking.  It can be pretty annoying for others.
-  * VOX is an option to transmit without pressing the PTT.  You should turn that off unless you have a good reason for using it since you could transmit without meaning to.
+  * Disable //VOX//, which is an option to transmit without pressing the PTT.
 </WRAP>
@@ Line 158: / Line 158: @@
 See [[/links/meshcore/ |this page]] for more information on how to get started.
 </WRAP>
+{{:ecomm:meshcoremap.jpg}}
+The current network reaches from Parkville to Victoria to Abbotsford.
 </WRAP>
 </WRAP>