Differences

This shows you the differences between two versions of the page.

--- ecomm:non-ham [2026/11/07 19:36] – [Choosing a Radio] va7fi
+++ ecomm:non-ham [2026/11/07 23:13] (current) – va7fi
@@ Line 29: / Line 29: @@
-<pagebreak>
 ===== FRS =====
 <WRAP group>
@@ Line 122: / Line 121: @@
+==== First Use Setup ====
-<pagebreak>
 <WRAP group>
 <WRAP third column>
-==== First Use Setup ====
 Refer to the user manual for specific instructions, but in general, you should:
   * Disable the //CTCSS/DCS// on all 22 channels.  On the Revetis RB48, the CTCSS/DCS is represented by a number between ''1'' and ''121'' (on the right).  The number ''0'' means that CTCSS or DCS is disabled.
@@ Line 133: / Line 130: @@
 </WRAP>
 <WRAP third column>
-test
+Menu settings for the Retevis RB48:
+<WRAP indent>
+^1 |Channel |''03'' |
+^2 |CTCSS/DCS   |''00'' |
+^3 |Call Tone (''CA'') |''00''|
+^4 |Vox |''00'' |
+^5 |Power (''Pr'') |''HI''|
+^6 |Scan (''Sc'') |''ON'' |
+^7 |Roger Beep (''rb'') |''OFF'' |
+^8 |Vibration (''U1'') |''OFF'' |
+</WRAP>
 </WRAP>
 <WRAP third column>
@@ Line 160: / Line 168: @@
 </WRAP>
 {{:ecomm:meshcoremap.jpg}}
-The current network reaches from Parkville to Victoria to Abbotsford.
+The current network reaches from Port McNeill to Victoria to Abbotsford.
 </WRAP>
 </WRAP>