howto:aprs
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
howto:aprs [2019/08/17 23:04] – [Configuration] ve7hzf | howto:aprs [2023/02/17 08:59] – [Configuration] va7fi | ||
---|---|---|---|
Line 1: | Line 1: | ||
====== APRS ====== | ====== APRS ====== | ||
+ | {{ http:// | ||
+ | < | ||
+ | [[http:// | ||
+ | </ | ||
+ | |||
+ | Basically, the way it works is: | ||
+ | * Your APRS capable radio transmits data on 144.39 Mhz (in North America). | ||
+ | * Someone else's APRS capable radio hears that data and can display it, store it, and re-transmit it to extend the range of the network. | ||
+ | |||
+ | ===== APRS-IS ===== | ||
+ | |||
+ | < | ||
+ | [[https:// | ||
+ | </ | ||
+ | |||
+ | Basically, the way it works is: | ||
+ | * Your APRS capable radio connected to a computer and sends what it hears to the internet (this configuration is called an IGate). | ||
+ | * Others can view this information [[https:// | ||
+ | |||
+ | |||
+ | |||
+ | ===== Windows ===== | ||
[[http:// | [[http:// | ||
Line 5: | Line 27: | ||
- | ===== Configuration | + | ==== Configuration ==== |
- | To use with Linksys, see the [[/howto/ | + | To use with Signalink, see the [[howto:signalink|Signalink |
- | {{ : | + | |
- | Once the radio, the Linksys, and the Soundmodem are configured, start PinPoint and change these settings: | + | Once the radio, the Signalink, and the Soundmodem are configured, start PinPoint and change these settings: |
{{ : | {{ : | ||
{{ : | {{ : | ||
- | Note how the Network Kiss Port (8100) in the PinPoint settings needed to be changed to match the SoundModem settings. | + | Note: |
+ | * Network Kiss Port (8100) in the PinPoint settings needed to be changed to match the SoundModem settings. | ||
+ | * Also, the Serial TNC Settings don't matter since they are not being used by Network Kiss. | ||
+ | |||
+ | ===== SSID ===== | ||
+ | You'll sometimes see a dash number after the callsign, this is called an SSID and they have different meaning depending on whether you're on APRS or Winlink. | ||
+ | |||
+ |
howto/aprs.txt · Last modified: 2023/02/17 09:01 by va7fi