howto:aprs
This is an old revision of the document!
APRS
Pinpoint is a Windows program for APRS.
Configuration
To use with Signalink, see the Packet How-to.
Once the radio, the Signalink, and the Soundmodem are configured, start PinPoint and change these settings:
Note:
- Network Kiss Port (8100) in the PinPoint settings needed to be changed to match the SoundModem settings.
- Also, the Serial TNC Settings don't matter since they are not being used by Network Kiss.
- See APRS SSID Recommendations to setup your callsing properly.
howto/aprs.1566109822.txt.gz · Last modified: 2019/08/17 23:30 by ve7hzf