Differences

This shows you the differences between two versions of the page.

--- howto:hambasics:sections:electronics [2021/01/01 20:49] – [RLC Impedance] va7fi
+++ howto:hambasics:sections:electronics [2022/11/21 21:36] (current) – [RLC Impedance] va7fi
@@ Line 6: / Line 6: @@
 ====== Electronics ======
+In this section we'll discuss the three basic electronic components:
+^Name          ^Property    ^Unit      ^  Symbol    ^  Picture                  ^Source  |
+|Resistor (R)  |Resistance  |Ohm (Ω)   |  {{r.png}}  |  {{resistors.jpeg?100|}}  |[[wp>Resistor]] |
+|Inductor (L)  |Inductance  |Henry (H) |  {{l.png}}  |  {{inductors.png}}        |[[wp>Inductor]] |
+|Capacitor (C) |Capacitance |Farad (F) |  {{c.png}}  |  {{capacitors.jpeg?100}}  |[[wp>Capacitor]] |
+===== Resistor =====
+The easiest component to start with is the resistor.
+Resistors have many usage:
+<WRAP indent>
+<<In electronic circuits, resistors are used to reduce current flow, adjust signal levels, divide voltages, bias active elements, and terminate transmission lines, among other uses. High-power resistors that can dissipate many watts of electrical power as heat [...] or as test loads for generators. Fixed resistors have resistances that only change slightly with temperature, time or operating voltage. Variable resistors can be used to adjust circuit elements (such as a volume control or a lamp dimmer), or as sensing devices for heat, light, humidity, force, or chemical activity.>> [[wp>Resistor |Wikipedia: Resistor]]
+</WRAP>
 ===== RLC Impedance =====
-|< 100% >|
+{{  lc_graphs.png?250}}
-^Impedance [Ω]                                        ^Low Frequency ^ Medium Frequency ^ High Frequency |
+^Impedance (Ω)                                        ^Low Frequency ^ Medium Frequency ^ High Frequency |
 |Resistance, R                                        |  Doesn't depend on frequency             |||
-|Inductive Reactance \\ \$X_L = 2\pi f L\$            |  Low         |  Medium          |  High  |
+|Inductive Reactance \\ <fc #008000>\$X_L = 2\pi f L\$</fc>            |  Low         |  Medium          |  High  |
-|Capacitive Reactance \\ \$X_C = \frac{1}{2\pi f C}\$ |  High        |  Medium          |  Low  |
+|Capacitive Reactance \\ <fc #960018>\$X_C = \frac{1}{2\pi f C}\$</fc> |  High        |  Medium          |  Low  |
 ===== RLC Addition =====