User Tools

Site Tools


howto:starticip

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
howto:starticip [2020/08/07 13:03] – external edit 127.0.0.1howto:starticip [2021/07/09 20:48] (current) va7fi
Line 22: Line 22:
     * Password: (written on the modem below the word "admin" It's NOT your wifi password.)     * Password: (written on the modem below the word "admin" It's NOT your wifi password.)
   * In the centre of the page, scroll down until you find your device and note its IP address:   * In the centre of the page, scroll down until you find your device and note its IP address:
-{{ :howto:devices.png }}+{{ :howto:starticip:devices.png }}
  
  
Line 29: Line 29:
   * Type the command ''arp -a'' This will list all the devices connected to the network.   * Type the command ''arp -a'' This will list all the devices connected to the network.
   * Find the IP address of your device and note its "Physical Address" (that's the MAC address)   * Find the IP address of your device and note its "Physical Address" (that's the MAC address)
-{{ :howto:mac.png }}+{{ :howto:starticip:mac.png }}
  
  
Line 40: Line 40:
   * Click "Apply"   * Click "Apply"
   * Wait a few seconds and reboot the device so it gets assigned its new IP address.   * Wait a few seconds and reboot the device so it gets assigned its new IP address.
-{{ :howto:dhcp.png }}+{{ :howto:starticip:dhcp.png }}
  
  
Line 55: Line 55:
   * Select UDP   * Select UDP
   * Click on "Apply"   * Click on "Apply"
-{{ :howto:portforwarding.png }}+{{ :howto:starticip:portforwarding.png }}
  
  
howto/starticip.txt · Last modified: 2021/07/09 20:48 by va7fi