User Tools

Site Tools


howto:stationcoax

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
howto:stationcoax [2021/07/10 19:12] – [Outside] va7fihowto:stationcoax [2021/07/10 19:18] (current) – [Station Coax and Grounding] va7fi
Line 1: Line 1:
 ~~NOTOC~~ ~~NOTOC~~
 ====== Station Coax and Grounding ====== ====== Station Coax and Grounding ======
-This is how VA7FI manages his coax runs into the house.  It's meant as an example to help people get startednot as the definitive authority on the subject.  [[va7fi@rbox.me |Feedback is always welcome]].+This is how VA7FI manages his coax runs into the house.  It's meant as an example to help people get started.  I'not an authority on the subject.  [[va7fi@rbox.me |Feedback is always welcome]].
  
 ===== Outside ===== ===== Outside =====
Line 14: Line 14:
  
 On the grounding side: On the grounding side:
-  * The antennas up the tree are grounded to a few ground rods and a ground plate.+  * The antennas up the tree are grounded to a ground rod and a ground plate.
   * Those are bonded to the ground plate that connects to the transition box.   * Those are bonded to the ground plate that connects to the transition box.
   * That is also bonded to the utility ground of the house.   * That is also bonded to the utility ground of the house.
Line 21: Line 21:
 ===== Inside ===== ===== Inside =====
 {{  :howto:stationcoax:inside.jpg?400}} {{  :howto:stationcoax:inside.jpg?400}}
-  * The RG-8X from the transition box connects to the bottom of a patch panel, and the top is labelled with which antenna is connected there. +  * The RG-8X from the transition box connects to the back of a patch panel, and the front is labelled with which antenna is connected there. 
-  * Radios connect to the top of the patch panel, and the patch cords are labelled with the radio.+  * Radios connect to the front of the patch panel, and the patch cords are labelled with the radio.
   * The patch panel is bonded to the transition box outside, and the radios are connected to the patch panel.   * The patch panel is bonded to the transition box outside, and the radios are connected to the patch panel.
 The patch panel makes it very easy to swap antennas between radios without ever having to disconnect anything behind the radio itself. The patch panel makes it very easy to swap antennas between radios without ever having to disconnect anything behind the radio itself.
howto/stationcoax.1625969564.txt.gz · Last modified: 2021/07/10 19:12 by va7fi