User Tools

Site Tools


howto:winlink_ardop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
blog:2020-10-16:winlink_ardop [2020/10/17 16:15] – [The Spreadsheet] va7fihowto:winlink_ardop [2023/10/24 22:40] (current) va7fi
Line 1: Line 1:
 ====== Winlink ARDOP ====== ====== Winlink ARDOP ======
 +Winlink ARDOP is a method of sending "email" messages over HF radio via an RMS station.  If you are new to Winlink, see the [[howto/winlink |Winlink How-To]] first.
  
-Winlink ARDOP is a method of sending "email" messages over HF radio via an RMS station (see the [[howto/winlink |Winlink How-To]] for more info).+===== Initial Setup ===== 
 +  * Before connecting the radio to the computer for the first time, ensure to [[7300digital#ic-7300_windows_driver |install the driver]]
 +  * Ensure the radio is [[7300digital#radio_settings_for_digital_modes |setup for digital mode]], turn it on, and connect it to the computer.  
 +  * Open Winlink and open an ''Ardop Winlink'' session \\ {{  :howto:winlink:ardop6.png  }} 
 +  * Under the Ardop Session ''Settings'' \\ {{  :howto:7300digital:ardop_session.png  }} 
 +    * Copy the following ''Ardop TNC Setup'' \\ {{  :howto:7300digital:ardop_setup.png  }} 
 +    * Copy the following ''Radio Setup'' \\ {{  :howto:7300digital:ardop_settings.png  }} 
 +  * Under the Virtual TNC ''File'' \\ {{  :howto:7300digital:aredop_virtual_tnc.png  }} 
 +    * Copy the following ''Virtual TNC Setup'' \\ {{  :howto:7300digital:ardop_virtual_tnc_setup.png  }} 
 +    * Copy the following ''Optional Radio Settings'' \\ {{  :howto:7300digital:ardop_radio_settings.png  }}
  
-Every week, I connect to RMS stations in different locations and keep a log so I can track the most reliable ones.  Here's the scenario I'm considering and how I'd use my log. 
  
-===== The Scenario =====+===== Radio Check ===== 
 + 
 +<WRAP center round box 90%> 
 +==== The Scenario ====
 In the event of an emergency where the power, phone, and internet are all down, I want to be able to send my family back east a quick email to let them know that I'm ok, and offer the same service to others in my neighbourhood. In the event of an emergency where the power, phone, and internet are all down, I want to be able to send my family back east a quick email to let them know that I'm ok, and offer the same service to others in my neighbourhood.
 +</WRAP>
  
-===== Radio Check ===== +The first step is to select a list of stations I can connect to from my location.  To do this, select: 
-{{ :blog:2020-10-16:adrop2.png}} +  * ''Channel Selection'' to see a list of all available stations. 
-Every week, I connect to RMS stations in different locations without actually sending or receiving messages just to see how long the "handshake" takes and to see if I can connect at all.+  * ''Update Via Internet'' to update the propagation information (last two columns). 
 +  * Sort by ''Path Reliability Estimate'' or ''Path Quality Estimate'' to see the most reachable stations first. 
 +{{ howto:winlink:ardop4.png }} 
 + 
 +These stations can also be visualized using the ''Map'' option or from the [[https://winlink.org/RMSChannels |Winlink website]]. 
 +{{ :howto:winlink:ardop5.png }} 
 + 
 + 
 +{{ howto:winlink:ardop2.png}} 
 +Every week, I connect to RMS stations in different locations without actually sending or receiving messages just to see how long the "handshake" takes to see if I can connect at all.
  
-I save the successful connections to my Winlink favourites for quick retrieval, but I also log them in a spreadsheet that I continuously analyze.+I save the successful connections to my Winlink favourites for quick retrieval, but I also log them in a spreadsheet for further analysis.
  
 ===== The Spreadsheet ===== ===== The Spreadsheet =====
-The Winlink favourites list is a good tool, but it's hard to "rank" the best stations.  To that end, I use a {{ :blog:2020-10-16:winlink_ardop.ods |spreadsheet}} to log the following information in addition to the stations' frequency and location:+The Winlink favourites list is a good tool, but it's hard to "rank" the best stations.  To that end, I use a {{ howto:winlink:winlink_ardop.ods |spreadsheet}} to log the following information in addition to the stations' info:
   * The length of the session (the shorter the better).   * The length of the session (the shorter the better).
   * The date I last connected (the most recent the better).   * The date I last connected (the most recent the better).
-  * The number of times I managed a connection (the more times the better).+  * The number of times I managed a connection (the more times the better), which auto calculates the percentage of time I've been able to connect to the station.
  
-I also perform a crude approximation of the coastal distance of the RMS station.  The rational here is that if an Earthquake hits, there's a good chance that coastal RMS stations will be affected or overloaded so I want to be able to connect to a station further inland.+I also perform a crude approximation of the coastal distance of the RMS station.  The rational here is that if an earthquake hits, there's a good chance that coastal RMS stations will be affected or overloaded so I want to be able to connect to a station further inland.
  
 Based on all these different measures, I then create a semi-subjective ranking of the stations.  Those are the stations I would try to connect to first.  Based on all these different measures, I then create a semi-subjective ranking of the stations.  Those are the stations I would try to connect to first. 
  
-{{ :blog:2020-10-16:ardop.png }}+{{ howto:winlink:ardop.png }} 
 + 
 +<WRAP center round info 90%> 
 +  * Some stations have a daily connection time limit.  This is the //total// time I can be connected to that station (combining different frequencies or bands) during a given day. 
 +  * Some stations have the ability to hold and forward messages if the station's internet goes down.  This only works if the sender and recipient connect to the same RMS.  These are called **hybrid** stations. 
 +</WRAP>
  
 The purpose of this spreadsheet is to do the "thinking" ahead of time so that in a real emergency, I can just look at the ranking to select the best frequency. The purpose of this spreadsheet is to do the "thinking" ahead of time so that in a real emergency, I can just look at the ranking to select the best frequency.
Line 35: Line 62:
 To visualize the calculations, start with an [[https://ns6t.net/azimuth/azimuth.html |Azimuthal Map]] centred at your location. To visualize the calculations, start with an [[https://ns6t.net/azimuth/azimuth.html |Azimuthal Map]] centred at your location.
  
-{{ :blog:2020-10-16:azimuthalmap.png }}+{{ howto:winlink:azimuthalmap.png }}
  
   * I drew two lines to represent the coast.  One going north west at a bearing of 330° and one going south at a bearing of 170°.  These two lines are eye-ball approximations of where most of the coast is.   * I drew two lines to represent the coast.  One going north west at a bearing of 330° and one going south at a bearing of 170°.  These two lines are eye-ball approximations of where most of the coast is.
Line 46: Line 73:
   - But a more subtle point is that this simple geometry only works on a flat surface, not on the curved surface of the globe.   - But a more subtle point is that this simple geometry only works on a flat surface, not on the curved surface of the globe.
  
-That being said, my purpose is not to know exactly how far the stations are from the coast, but to be able to roughly rank them so that I can identify those that are the furthest. +That being said, my purpose is not to know exactly how far the stations are from the coast, but to be able to roughly rank them so that I can identify those that are the furthest inland.
 </hidden> </hidden>
 \\ \\
  
 ===== Ardop vs Vara vs Pactor ===== ===== Ardop vs Vara vs Pactor =====
-{{ :blog:2020-10-16:ardop3.png}}+{{ howto:winlink:ardop3.png}}
 There's essentially four different methods for sending Winlink messages on HF: There's essentially four different methods for sending Winlink messages on HF:
   * **Pactor** is the fastest / most robust method but it requires a [[https://www.radioworld.ca/scs-dr7400p4 |$2100 external modem]] to work.   * **Pactor** is the fastest / most robust method but it requires a [[https://www.radioworld.ca/scs-dr7400p4 |$2100 external modem]] to work.
Line 66: Line 93:
 Our local EOC reports to the SW PREOC in Surrey and [[http://www.percs.bc.ca/?page_id=10 |their website]] says: Our local EOC reports to the SW PREOC in Surrey and [[http://www.percs.bc.ca/?page_id=10 |their website]] says:
  
-<WRAP indent> +<QUOTE>The preferred method is data rather than voice. If you cannot get through peer to peer, send the message via Winlink. 
-<<The preferred method is data rather than voice. If you cannot get through peer to peer, send the message via Winlink.>> +</QUOTE>
-</WRAP>+
  
 It then goes on to list HF Data frequencies but doesn't say which mode to use (as if that was obvious).  But our local EOC has a Pactor modem so I assume that's the industry standard.  But that only matters for P2P. Winlink messages sent to an RMS will make it to their destination no matter the method. It then goes on to list HF Data frequencies but doesn't say which mode to use (as if that was obvious).  But our local EOC has a Pactor modem so I assume that's the industry standard.  But that only matters for P2P. Winlink messages sent to an RMS will make it to their destination no matter the method.
Line 77: Line 103:
 ==== What is best for individuals? ==== ==== What is best for individuals? ====
  
-Again, unless you want to use P2P, it doesn't matter if people are using different methods.  Both Ardop and the free version of Vara seem to work, although the demo version of Vara also shows an annoying popup screen every few minutes asking you to register.((Vara shows an annoying popup screen every few minutes. \\ {{:blog:2020-10-16:vara.png}}))+Again, unless you want to use P2P, it doesn't matter if people are using different methods.  Both Ardop and the free version of Vara seem to work, although the demo version of Vara also shows an annoying popup screen every few minutes asking you to register.((Vara shows an annoying popup screen every few minutes. \\ {{howto:winlink:vara.png?400}}))
  
 ==== Conclusion ==== ==== Conclusion ====
Line 85: Line 111:
 Personally, I can't justify spending $100 from my limited ham radio fund just to get a Winlink speed upgrade.  If the option was between having HF Winlink for $100, or no HF Winlink at all, I would spend the money, but $100 for a mere speed upgrade is below my diminishing returns threshold.  There's a lot of more I could do to improve my station with that money. Personally, I can't justify spending $100 from my limited ham radio fund just to get a Winlink speed upgrade.  If the option was between having HF Winlink for $100, or no HF Winlink at all, I would spend the money, but $100 for a mere speed upgrade is below my diminishing returns threshold.  There's a lot of more I could do to improve my station with that money.
  
-The other thing to consider is that if Vara figured out a way to increase the speed in a closed-proprietary way, it's just a matter of time before the Open Source Ardop team catches up.  Personally, I tend to favour open source options to closed proprietary ones not only because it's cheaper for myself, but also because it lowers the entry bar for others in the community to join.  If HF P2P is really important for our community, then we probably don't want to exclude people who can't afford the $100 entrance fee, so I vote: **Ardop**.+The other thing to consider is that if Vara figured out a way to increase the speed in a closed-proprietary way, it's just a matter of time before the Open Source Ardop team catches up.  Personally, I tend to favour open source options to closed proprietary ones not only because it's cheaper for myself, but also because it lowers the entry bar for others in the community to join.  If HF P2P is really important for our community, then we probably don't want to exclude people who can't afford the $100 entrance fee.
howto/winlink_ardop.1602976531.txt.gz · Last modified: 2020/10/17 16:15 by va7fi