| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| links:xband [2025/06/26 10:41] – [Adhoc Repeater] va7fi | links:xband [2025/06/26 10:46] (current) – [Repeater Extender] va7fi |
|---|
| |
| <WRAP center round info 80%> | <WRAP center round info 80%> |
| But also: look for a menu called something like ''RxMode'' The four options I have on mine are: | But also: look for a menu called something like ''RxMode''. The four options I have on mine are: |
| - ''CROSS BAND'' (uses two handhelds to create a cross band repeater) | - ''CROSS BAND'' (uses two handhelds to create a cross band repeater) |
| - ''DUAL RX RESPOND'' (the radio switches to which ever band it hears for the next transmit) | - ''DUAL RX RESPOND'' (the radio switches to whichever band it hears for the next transmit) |
| - ''MAIN ONLY'' (the radio only uses the selected band so you can't hear the second one) | - ''MAIN ONLY'' (the radio only uses the selected band so you can't hear the second one) |
| - ''MAIN TX / DUAL RX'' (the radio only transmits on the selected band, but can hear both) | - ''MAIN TX / DUAL RX'' (the radio only transmits on the selected band, but can hear both) |
| ===== Repeater Extender ===== | ===== Repeater Extender ===== |
| ==== Simplest ==== | ==== Simplest ==== |
| This is a scheme I use sometimes at home with my base station in crossband mode: I tune one receiver to our local repeater, and the other to a simplex UHF frequency. I can then use my handheld around the house and the yard with the "power" of my base station and antenna to get into the repeater. | This is a scheme I used to use at home with my base station in crossband mode: Tune one receiver to our local repeater, and the other to a simplex UHF frequency. Then use the handheld around the house and the yard with the "power" of my base station and antenna to get into the repeater. |
| |
| {{ links:xband:xband2.png?800 |}} | {{ links:xband:xband2.png?800 |}} |
| |
| <WRAP center round important 90%> | <WRAP center round important 90%> |
| One thing to keep in mind with crossband repeat is that the radio doing the repeating is transmitting every time someone transmits. Using this scheme to listen to an hour long net means that the radio would transmit at <fc #ff0000>close to 100% duty cycle</fc>, which it may or may not be designed to do. It would be best to use the lowest power setting and/or keep the use to a minimum. | The biggest flaw with this setup is that the radio doing the repeating is transmitting every time someone transmits, which means that the radio could transmit at <fc #ff0000>close to 100% duty cycle</fc>, which it may or may not be designed to do. So it's best to use the lowest power setting and/or keep the use to a minimum. |
| </WRAP> | </WRAP> |
| | |
