User Tools

Site Tools


temp

This is an old revision of the document!


Dipole Length

A Bit of Theory

In general, the wavelength (\$\lambda\$), frequency (\$f\$), and speed (\$v\$) of a travelling wave are related by the three equivalent relations: \$$ v = \lambda f \qquad \text{or} \qquad f = \frac{v}{\lambda} \qquad \text{or} \qquad \lambda = \frac{v}{f} \$$

In ham radio, we often use the last equation to calculate the length of the legs of a dipole antenna:

  • The speed of a radio wave travelling in free space is the speed of light:

\$$v = 300000000 \text{ m/s}\$$

  • So using the last equation, if the frequency is in Hz, then the wavelength (in metres) is:

\$$ \lambda = \dfrac{300000000}{f} \$$

  • But if we measure the frequency in MHz, then the equation becomes:

\$$ \lambda = \dfrac{300}{f} \$$

  • Since each leg of a dipole is a quarter of the wavelength, each leg should measures \$ L = \frac{\lambda}{4}\$ :

\$$ L = \dfrac{75}{f} \text{ (in metres)} \qquad \text{or} \qquad L = \dfrac{246}{f} \text{ in feet}\$$

  • However, the speed of the electric field in a dipole is about 95% of the speed of light in freespace, so you'll often see these formulas instead:

\$$ L = \dfrac{71}{f} \text{ (in metres)} \qquad \text{or} \qquad L = \dfrac{234}{f} \text{ in feet}\$$

Some Experimentation

The problem is that the velocity factor of 95% depends on many things like the size of the cable, the geometry of the antenna, what's around it, etc. So what we can do instead is use the first formula \$ \quad v = \lambda f \quad \$ to measure what the actual speed is for our setup. Here's how I figured out how to cut my inverted V antenna be resonant at 5.3305 MHz.

  • The first step is to build an antenna that's a bit too long (so I can trim it). For that, I used the original equation to get the length of each legs, and added a bit to tie the end points:

\$$ L = \dfrac{75}{f} = \dfrac{75}{5.3305} \approx 14.06 \text{ m} \$$

  • Next, I set up the antenna at its final install location.
  • I use my SWR metre to find the frequency of lowest SWR. Mine was \$4.98\$ MHz.
  • Now I use that with the length to calculate the speed using the first formula:

\$$ v = \lambda f = 14.06 \times 4.98 = 70.0 \$$

  • I can now re-calculate the length I need based on this empirical speed:

\$$ \quad L = \dfrac{70.0}{5.3305} \approx 13.12 \text{ m} \quad \$$

  • Finally, I simply trim each leg by:

\$$ 14.06 \text{ m} - 13.12 \text{ m} = 0.94 \text{m} \$$

Other Considerations

temp.1794794123.txt.gz · Last modified: by va7fi