Differences

This shows you the differences between two versions of the page.

--- howto:signalink [2023/10/18 17:39] – [Initial Software Configuration] va7fi
+++ howto:signalink [2023/10/18 17:46] – [Initial Software Configuration] va7fi
@@ Line 62: / Line 62: @@
     * At this point, you might as well double click on the device and rename it "Signalink".  This will be useful if you ever connect multiple sound cards to the computer.
     * Click on ''Properties''
-      * Set the levels to 0dB or 100%
+      * Under ''Levels'': Set the levels to 0dB or 100%
-      * Disable all enhancements
+      * Under ''Enhancements'': check ''Disable all enhancements''
-      * Turn Spacial sound format OFF
+      * Under ''Spatial sound'': Turn Spacial sound format OFF
 {{  :howto:signalink:playback.png  }}
-  * Select the "Recording" tab
+  * Select the ''Recording'' tab
-    * Select "Microphone" and click on "Set Default" at the bottom of the window.
+    * Select ''Microphone'' and click on ''Set Default'' at the bottom of the window.
-    * Select "USB AUDIO CODEC" and click on "Default Communication Device"
+    * Select ''USB AUDIO CODEC'' and click on ''Default Communication Device''
     * Rename it "Signalink" also.
 {{  :howto:signalink:recording.png  }}
@@ Line 74: / Line 74: @@
 There should be a green check mark beside the speaker/Microphone (general computer sounds), and a green telephone beside the USB AUDIO CODEC (Default for communication sounds)
-  * Select the "Sounds" tab
+  * Select the ''Sounds'' tab
-    * Select the "No Sounds" scheme and do not Play Windows Startup sound.  This will ensure that Windows sounds don't get transmitted over the air.
+    * Select the ''No Sounds'' scheme and do not Play Windows Startup sound.  This will ensure that Windows sounds don't get transmitted over the air.
-  * Optionally, double click on the "USB AUDIO CODEC" and select the "Listen" tab and check the "Listen to this device" box to hear the radio through the computer's "Default Playback Device".
+  * Optionally, double click on the ''USB AUDIO CODEC'' and select the ''Listen'' tab and check the ''Listen to this device'' box to hear the radio through the computer's ''Default Playback Device''.
 {{  :howto:signalink:lineproperties.png  }}