Differences

This shows you the differences between two versions of the page.

--- links:meshcore:home [2026/09/12 12:14] – va7fi
+++ links:meshcore:home [2026/09/16 11:33] (current) – va7fi
@@ Line 46: / Line 46: @@
   * A device with the MeshCore //companion// firmware paired to your cellphone.
   * If needed, a device with the MeshCore //repeater// firmware to extend messaging range.
-  * Each person who wants to send messages will need their own //companion// device.
+  * Each person who wants to send messages needs their own //companion// device.
 === Download the MeshCore App ===
@@ Line 90: / Line 90: @@
   * Select Flash
-To re-load the config file:
+To re-load your previous config file:
   * Open the MeshCore App
   * Connect to the companion device, but it probably had a different bluetooth name now
@@ Line 106: / Line 106: @@
 ==== Connect to your MeshCore Device ====
-  * Turn on your node.
+  * Turn on your device.
   * Open the MeshCore App.
   * Tap the "Connect" button in the top right corner.
@@ Line 188: / Line 188: @@
 <WRAP center round important 70%>
 In the South West BC area, edit the settings to the following:
-|                |**Until Sept 30, 2026** |**From Oct 1, 2026**|
+|                    |**Until Sept 30, 2026** |**From Oct 1, 2026**|
-|**Frequency**     |910.425             |909.000             |
+|**Frequency**       |910.425                 |**909.000**             |
-|**Bandwidth**       |62.5 kHz            |62.5 kHz            |
+|**Bandwidth**       |62.5 kHz                |62.5 kHz            |
-|**Spreading Factor**|7                   |7                   |
+|**Spreading Factor**|7                       |7                   |
-|**Coding Rate**     |5                   |5                   |
+|**Coding Rate**     |5                       |5                   |
 See [[https://ridgeline.ve7kod.ca/faq |here]] for more details.