Differences

This shows you the differences between two versions of the page.

--- links:meshcore:part2 [2026/10/29 19:17] – [Repeaters] va7fi
+++ links:meshcore:part2 [2026/10/30 17:16] (current) – created - external edit (Unknown date) 127.0.0.1
@@ Line 9: / Line 9: @@
 </WRAP>
 </WRAP>
-This is the second part of the Meshcore Guide.  See the [[part1|first part]] to get started.
+This is the second part of the Meshcore Guide.  See the [[part1|first part here]].
 ----
 ====== Repeaters ======
-<WRAP centeralign>
-{{ :links:meshcore:meshcore1.png?600 |}}
-</WRAP>
-As mentioned in the [[#part1 |first part]], repeaters are used to extend the range of companions. With radios the range roughly depends on three factors:
-  * the antenna characteristics of **both** radios, their heights above the ground, and the line of sight between them.
-  * the transmitting power of **both** radios.
-  * and the frequency band used.
-<WRAP pagebreak />
   * Install a repeater like the //SenseCAP Solar Node P1-Pro// from [[https://www.seeedstudio.com/SenseCAP-Solar-Node-P1-Pro-for-Meshtastic-LoRa-p-6412.html|Seeed Studio]] or [[https://ca.robotshop.com/products/sensecap-solar-node-p1-pro-for-meshtastic-w-gps-battery |RobotShop]]
   * Use an antenna like:
@@ Line 123: / Line 110: @@
   * Enter the "''Antenna Coverage''" tool
   * Where it says "''0 Coverage Layers''", click on <key>**⋮**</key> and select "''Import JSON''"
-  * Import this {{:links:meshcore:coverage_layers_2026-03-27-221828.json |json file}}
+  * Import [[:links:meshcore:coverage_layers_2026-03-27-221828.json |this file]]